chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Hydraulic Brake Booster Pump Module/Relay <--> [Hydraulic Brake Booster Pump Relay] > < Power Brake Booster Inlet Hose Replacement|Page 7096
Page 2
background image

NOTICE:  Refer to Fastener Notice in Service Precautions.

3. Install the power steering outlet hose (2) to the steering gear (1).

^

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

4. Install the power steering outlet hose (1) to the hydraulic brake booster (2).

^

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

5. Check the power steering fluid level.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.

Hydraulic Brake Booster Pump Module/Relay <--> [Hydraulic Brake Booster Pump Relay] > < Power Brake Booster Inlet Hose Replacement|Page 7096