Express 1/2 Ton Van V6-4.3L VIN W (1999)
Electronic Brake Control Module: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: After installation, calibrate the new Electronic Brake Control Module (EBCM) to the tire size that is appropriate to the vehicle.
Refer to Tire Size Calibration portion of ABS Description.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Negative Battery Cable.
2. Raise vehicle and properly support.
3. Remove the three Electro-Hydraulic Control Unit (EHCU) (1) shield bolts and shield.
4. Disconnect the four electrical connectors from EBCM.
5. Remove the three bolts (1) that fasten the EHCU bracket to the frame.