Express 1/2 Ton Van V6-4.3L VIN W (1999)
Installation Procedure
^
Tools Required
-
J 23523-F Balancer Remover and Installer
1. Use J 23523-F to install the crankshaft balancer.
2. Install the crankshaft pulley.
3. Loosely install the crankshaft pulley bolts.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the crankshaft balancer bolt.
4.1. Tighten the crankshaft balancer bolt to 95 Nm (70 ft. lbs.).
4.2. Tighten the crankshaft pulley bolts to 58 Nm (43 ft. lbs.).
5. Install the drive belt.
6. Install the fan shroud assembly.
7. Connect the battery negative cable.
