Replacing Left Valve Rocker Arm Cover: Step-by-Step Guide (1999)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Left)
Removal Procedure
1. Remove the engine cover.
2. Disconnect the Engine Coolant Temperature (ECT) gauge sensor.
3. Remove the PCV valve and hose assembly from the valve rocker arm cover and the intake manifold.
4. Remove the spark plug wires for the left side of the engine from the distributor cap.
5. Remove the rear spark plug wire harness retainer from the EGR valve inlet pipe bracket.
6. Remove the valve rocker arm cover.
7. Clean all sealing surfaces.
Installation Procedure