Express 1/2 Ton Van V6-4.3L VIN W (1999)
Engine Accessory Bracket: Service and Repair
Accessory Mounting Brackets Replacement (Power Steering Pump)
Removal Procedure
1. Remove the fan shroud.
2. Remove the drive belt.
Important: Do not evacuate the air conditioning system.
3. Remove the mounting bolts (2) for the air conditioning compressor (1), if equipped.
4. Move the compressor aside and support.
5. Remove the drive belt idler pulley if not equipped with A/C.
6. Remove the power steering pump pulley.
7. Remove the three bolts holding the power steering pump to the power steering pump mounting bracket.
The power steering pump can remain on the engine.
8. Remove the three bolts and nut holding the power steering pump mounting bracket to the engine.
