Express 1/2 Ton Van V6-4.3L VIN W (1999)
9. Slide the power steering pump mounting bracket off the stud and power steering pump.
Installation Procedure
1. Slide the power steering pump mounting bracket on the stud and the power steering pump.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the three bolts and the nut.
^
Tighten the power steering pump mounting bolts and nut to 41 Nm (30 ft. lbs.).
3. Install the three bolts for the power steering pump.
^
Tighten the power steering pump mounting bracket to power steering pump bolts to 50 Nm (37 ft. lbs.).
4. Install the power steering pump pulley.
5. Install the air conditioning compressor, if equipped.
6. Install the drive belt idler pulley if not equipped with A/C.
7. Install the drive belt.
8. Install the fan shroud.
