Express 1/2 Ton Van V6-4.3L VIN W (1999)
Engine Accessory Bracket: Service and Repair
Accessory Mounting Brackets Replacement (Generator)
Removal Procedure
1. Disconnect the battery negative cable. Refer to Battery Cable Replacement (Battery Disconnect/Connect) in Starting and Charging.
2. Remove the engine cover.
3. Remove the coolant recovery reservoir.
4. Remove the air cleaner assembly and the air inlet duct from the throttle body.
5. Remove the engine oil and the transmission fluid level indicators.
6. Remove the screw holding the oil level indicator tube and the transmission fluid fill tube to the oil fill tube lower support.
7. Remove the upper section of the oil level indicator tube.
8. Remove the nut holding the transmission fluid fill tube to the rear of the right cylinder head.
9. Remove the upper section of the transmission fluid fill tube.
10. Remove the screw holding the oil fill tube to the oil fill tube lower support.
11. Remove the oil fill tube.
