Express 1/2 Ton Van V6-4.3L VIN W (1999)
1. Slide the generator mounting bracket on the stud.
2. Instal the three bolts and the nut.
^
Tighten the generator mounting bracket bolts and nut to 41 Nm (30 ft. lbs.).
3. Install the drive belt idler pulley.
4. Install the drive belt tensioner.
5. Install the generator.
6. Install the drive belt.
7. Install the paper fan shroud section.
8. Install the oil fill tube lower support, the bolt and the stud.
^
Tighten the oil fill tube lower support stud and the bolt to 25 Nm (18 ft. lbs.).
9. Install the engine wiring harness retainer on the stud.
10. Install the heater inlet and outlet hose brackets and the bolts to the oil fill tube lower support.
^
Tighten the heater hose bracket bolts to 5 Nm (44 inch lbs.).