Express 1/2 Ton Van V6-4.3L VIN W (1999)
2. Use the J 38834 in order to install the balance shaft rear bearing.
2.1. Install the J 38834-3 onto the short threaded end of the J 38834-1.
2.2. Install the nut, washer, and bearing on the long threaded end the J 38834-1.
2.3. Install the J 38834-2 so that the smaller diameter will be facing the front, onto the J 38834-1.
2.4. Install the J 38834-2 on the inside of the balance shaft front bearing bore.
2.5. Install the balance shaft rear bearing on the J 38834-3.
2.6. Position the balance shaft rear bearing.
2.7. Hold the J 38834-1 with a wrench and turn the nut counterclockwise until the balance shaft rear bearing is installed.
3. Install the balance shaft.
