Express 1/2 Ton Van V6-4.3L VIN W (1999)
Compressor Clutch Coil: Service and Repair
Compressor Clutch Coil Removal (HT6/HD6)
TOOLS REQUIRED
^
J 6083 Snap Ring Pliers
^
J 33023-A Puller Pilot
^
J 41552 Pulley Puller
^
J 8433-1 Puller Bar
^
J 33025 Clutch Coil Puller Legs
^
J 8433-3 Forcing Screw
1. Remove the clutch plate and hub assembly.
2. Use the J 6083 in order to remove the following components:
^
The pulley rotor (1)
^
The bearing assembly retaining ring (2)
3. Install the J 33023-A to the front head.
4. Install the J 41552 down into the inner circle of slots (1) in the rotor.