Express 1/2 Ton Van V6-4.3L VIN W (1999)
7. Install the instrument cluster trim plate.
Control Switch Replacement - Auxiliary (Center)
REMOVAL PROCEDURE
1. Remove the instrument cluster trim plate.
2. Disconnect the electrical connector from the switch.
3. Remove the switch from the bezel by releasing the tabs on the side of the switch.
INSTALLATION PROCEDURE
1. Install the switch into the bezel by snapping the switch into place.
2. Connect the electrical connector to the switch.
3. Install the instrument cluster trim plate.
Control Switch Replacement - Auxiliary (Front)
REMOVAL PROCEDURE
1. Remove the front control switch bezel (4) from the headliner.
2. Remove the front control switch (3) by unsnapping the retainers from the headliner.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
