Express 1/2 Ton Van V6-4.3L VIN W (1999)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement (Base Vehicles)
REMOVAL PROCEDURE
1. Remove the screws (3) that retain the park/turn signal lamp to the radiator grille.
2. Remove the park/turn signal lamp (2) from the radiator grille.
3. Disconnect the bulb socket (1) from the park/turn signal lamp by turning the bulb sockets in a counterclockwise direction.
4. Remove the bulb (1) from the socket.
INSTALLATION PROCEDURE
1. Connect the bulb (1) into the socket.
2. Connect the bulb socket (1) into the park/turn signal lamp.
3. Install the park/turn signal lamp (2) to the radiator grille (5).
NOTE: Refer to Fastener Notice in Cautions and Notices.
4. Install the park/turn signal lamp retaining screws (3) to the radiator grille.
Tighten
Tighten the screws to 1.5 N.m (13 lb in).