Express 1/2 Ton Van V6-4.3L VIN W (1999)
3. Install the coil assembly retaining ring. Ensure that the ring (1) is firmly seated in the groove on the upper shaft assembly (2).
4. Pop the wire harness assembly (4) into the wire strap (5).
5. Install the wire harness strap (2) into the upper tilt head assembly (1).
6. Install 3 wire harness straps (3) from the wire harness assembly.
7. Install the tilt lever (If equipped).
8. Install the steering wheel.
9. Enable the SIR system.