Express 1/2 Ton Van V6-4.3L VIN W (1999)
4. Install the power steering outlet hose (1) to the hydraulic brake booster (2).
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
5. Check the power steering fluid level.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.
Power Steering Gear Pipe/Hose Replacement - Inlet
REMOVAL PROCEDURE
1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Remove the power steering inlet hose (2) from the steering pump (1).
4. Remove the steering gear inlet hose (1) from the steering gear (2).