Express 1/2 Ton Van V6-4.3L VIN W (1999)
Steering Shaft: Service and Repair
Steering Wheel and Column - Standard
REMOVAL PROCEDURE
-
Tools Required
-
J 42640 Steering Column Anti-Rotation Pin
1. Install the J 42640 anti-rotation pin in the steering column lower access hole.
2. Remove the protective cover from the steering column under the Instrument Panel to gain access to the bolt.
3. Remove the bolt (3) retaining the intermediate shaft (2) to the steering column (1).
4. Raise the vehicle. Support the vehicle with suitable safety stands.
5. Remove the air cleaner assembly.
6. Mark the Intermediate Shaft to Steering Gear alignment before removal.