Express 1/2 Ton Van V6-4.3L VIN W (1999)
6. Mark the Intermediate Shaft to Steering Gear alignment before removal.
7. Position the intermediate shaft cover (1) for access to the lower shaft pinch bolt. Turn the steering wheel to allow access to the pinch bolt.
8. Remove the intermediate shaft retaining bolt (3) from the steering gear stub shaft.
9. Remove the intermediate shaft from the vehicle.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Make sure to align the marks made at removal.
Install the intermediate shaft (1) to the steering gear stub shaft.
2. Install the intermediate shaft retaining bolt (3) to the steering gear stub shaft.
-
Tighten the intermediate shaft retaining bolt to the steering gear stub shaft to 61 Nm (45 ft. lbs.).
3. Install the air cleaner assembly.
