Express 1/2 Ton Van V6-4.3L VIN W (1999)
4. Install the intermediate shaft (2) to the steering column (1).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the intermediate shaft retaining bolt (3) to the steering column (1).
-
Tighten the intermediate shaft bolt to the steering column to 47 Nm (35 ft. lbs.).
Make sure the cover to the steering column is inside the intermediate shaft cover.
6. Remove the safety stands. Lower the vehicle.
7. Remove the J 42640 anti-rotation pin from the steering column lower access hole.