Express 1/2 Ton Van V6-4.3L VIN W (1999)
8. Install the nut and the bolt that retains the wheel speed sensor harness and brake hose (1) to the upper control arm.
-
Tighten the speed sensor retaining nut to 17 Nm (13 ft. lbs.).
9. Install the front brake caliper.
10. Install the tire and wheel assembly.
IMPORTANT:
10.1.
Check the running clearance at all of the suspension components.
10.2.
Remove the safety stands.
10.3.
Lower the vehicle. Check the front wheel alignment. Refer to Wheel Alignment Specifications in Alignment.
