Express 1/2 Ton Van V6-4.3L VIN W (1999)
Seals and Gaskets: Service and Repair
Rear Axle Housing Cover and Gasket Replacement (8.6 9.5, 10.5 Inch Axle)
Removal Procedure
1. Raise the vehicle.
2. Remove the rear axle fill plug.
3. Remove the rear axle housing cover bolts (1).
4. Remove the rear axle housing cover (2) from the axle housing.
4.1. Drain the oil into a suitable container.
4.2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
Installation Procedure