Express 1/2 Ton Van V6-4.3L VIN W (1999)
1. Install the rear axle housing cover (2) and a new gasket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear axle housing cover bolts (1).
Tighten
Tighten the rear housing bolts in a crosswise pattern to 40 Nm (30 lb ft).
3. Fill the rear axle. Use the proper fluid.
4. Install the rear axle fill plug.
Tighten
Tighten the rear axle fill plug to 33 Nm (24 lb ft).
5. Lower the vehicle.
