chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Panel|Service and Repair|Page 10802 > < Side Front Door - Does Not Stay Open|Page 10798
Page 1
background image

Front Door Panel: Service and Repair

REMOVAL PROCEDURE

TOOLS REQUIRED

J 9886-01 Door Handle Clip Remover

1. Use J 9886-01 Door Handle Clip Remover in order to remove the window regulator handle (2), if equipped.
2. Remove the window regulator handle bezel (4), if equipped.
3. Remove the front door garnish.
4. Remove the front door trim plate.
5. Remove the screws from the armrest.

6. Lift up on the front door trim panel in order to release the retaining tabs (2) on the front door trim panel.
7. Remove the front door trim panel from the vehicle.

INSTALLATION PROCEDURE

Front Door Panel|Service and Repair|Page 10802 > < Side Front Door - Does Not Stay Open|Page 10798