Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
9. Remove the front brake caliper from the front brake rotor.
10. Suspend the front brake caliper to the upper control arm with a wire hook.
11. Inspect the front caliper bolts for corrosion.
Replace any corroded parts.
Do not attempt to polish away any corrosion.
12. Inspect the caliper bolt bushings for nicks, cuts, or corrosion. Replace any damaged parts.
INSTALLATION PROCEDURE
1. Connect the front brake caliper to the front brake rotor ensuring that the bushings are positioned correctly.
2. Install the front brake caliper bolts and the sleeve.
3. Lubricate the front caliper bolts and sleeves with silicone paste.
^
Tighten the front brake caliper bolt to 51 Nm (38 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
