Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
2. Disconnect the rear brake pipe from the rear brake hose.
3. Remove the retainers of the brake pipe from the frame.
4. Remove the rear brake front pipe from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear brake front pipe to the vehicle.
2. Install the retainer of the brake pipe to the frame.
3. Connect the brake pipe to the rear brake hose.
^
Tighten the rear brake pipe to the rear brake hose to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
