Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
3. Remove the check valve. Use a locally fabricated wire hook with dimensions as shown.
INSTALLATION PROCEDURE
1. Install the check valve.
2. Assemble the booster cover to the booster housing (1, 2).
3. Install the bolts fastening the booster cover to the booster housing.
^
Tighten the bolts to 30 Nm (20 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
Fluid Flow Switch Replacement
REMOVAL PROCEDURE
