chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relays and Modules - Brakes and Traction Control > < Vacuum Brake Booster Check Valve Replacement (4.3L ENG)|Page 8431
Page 2
background image

2. Install the vacuum hose to the retaining bracket.
3. Install the retaining bracket to the stud.
4. Install the nut to the stud.

^

Tighten the nut to 11 Nm (97 inch lbs.).

NOTICE:  Refer to Fastener Notice in Service Precautions.

5. Install the check valve to the power brake booster.

Relays and Modules - Brakes and Traction Control > < Vacuum Brake Booster Check Valve Replacement (4.3L ENG)|Page 8431