Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
5. Raise the vehicle.
6. Install the fasteners to the oil pan. Refer to Oil Pan Installation under Engine Unit Repair.
7. Lower the vehicle.
8. Use the J 23523-F in order to install the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
9. Install the crankshaft pulley in the following manner:
^
Install the pulley and the three bolts.
^
Install the crankshaft balancer bolt.
^
Tighten the pulley bolts to 58 Nm (43 ft. lbs.).
^
Tighten the crankshaft balancer bolt to 100 Nm (74 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
10. Install the water pump.
11. Install the A/C condenser, if equipped.
12. Install the radiator.
13. Install the hood latch bracket.
14. Install the radiator grille.
15. Install the engine cooling fan and the upper fan shroud.
16. Install the valve lifters. Refer to Valve Lifter Installation under Engine Unit Repair.
17. Install the lower intake manifold.
18. Install the valve rocker arms and push rods.
19. Connect the battery negative cable.
20. Replace the engine oil filter.
