Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Engine Mount: Service and Repair
Engine Mount Replacement (Rear)
REMOVAL PROCEDURE
1. Raise the vehicle.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
NOTICE: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks,
the remaining mounts are subjected to abnormally high stresses.
2. Remove the nut holding the rear engine mount to the transmission support.
3. Remove the mount to transmission bolts.
4. Raise the transmission using a suitable transmission jack, just enough in order to permit the removal of the mount.
