chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount Inspection (Front)|Page 2554
Page 3
background image

4. Install the nut holding the rear engine mount to the transmission support.

^

Tighten the nut to 45 Nm (33 ft. lbs.).

^

Tighten the bolt to 50 Nm (37 ft. lbs.).

NOTICE:  Refer to Fastener Notice in Service Precautions.

5. Lower the vehicle.

Idler Pulley > < Engine Mount Inspection (Front)|Page 2554