Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
13. Install the engine oil cooler line retaining bolt to the oil filter adapter (4.3L only).
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
14. Install the engine oil cooler line retainers to the frame (except the 6.5L diesel).
^
Tighten the nut to 12 Nm (106 inch lbs.).
15. Install the engine oil cooler lines to the retaining bracket.
16. Install the engine oil cooler line retaining clip to the retaining bracket.
17. Install the retaining clip bolt to the retaining clip.
^
Tighten the bolt 12 Nm (106 inch lbs.).
18. Verify the oil level. Fill the oil as necessary.
