Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
1. Install the lower intake manifold to the engine.
Refer to Intake Manifold Replacement (Upper).
Refer to Intake Manifold Installation under Engine Unit Repair.
2. Install the valve rocker arm cover.
3. Install the power steering pump mounting bracket using the following procedure:
^
Install the power steering pump bracket onto the stud.
^
Install the nut onto the stud finger tight.
^
Install the three bolts finger tight.
^
Install the two nuts to the back of the power steering pump finger tight.
-
Tighten the nuts and the bolts to 44 Nm (32 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump pulley to the power steering pump.
5. Connect the electrical connector to the power steering pump.
6. Install the air conditioning (A/C) compressor, if equipped.
