Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
1. Install the gasket and the coolant pump.
2. Install the coolant pump retaining bolts.
^
Tighten the coolant pump retaining bolts on the to 45 Nm (33 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Connect the by-pass hose to the coolant pump.
4. Connect the lower radiator hose to the coolant pump.
5. Install the coolant pump pulley.
6. Install the fan and the clutch to the engine.
7. Install the accessory drive belt.
8. Install the upper fan shroud.
9. Install the coolant recovery reservoir.
10. Install the air cleaner and the duct assembly.
11. Refill the coolant.
12. Bleed the air from the cooling system.
