chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Throttle Position Sensor > < Accelerator Controls <--> [Throttle Cable/Linkage]|Specifications|Page 6358

Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)

Page 2
background image

4. Remove the accelerator cable from the accelerator pedal (2).

5. Remove the accelerator cable from the dash panel (1).

INSTALLATION PROCEDURE

1. Install the accelerator cable from the dash panel (1).
2. Install the accelerator cable from the accelerator pedal (2).
3. Install the accelerator cable from the cable routing bracket.
4. Install the accelerator cable from the engine cable bracket.
5. Install the throttle cable from the throttle lever.

Throttle Position Sensor > < Accelerator Controls <--> [Throttle Cable/Linkage]|Specifications|Page 6358