Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
30.
Obtain J 35800-A (2). Make sure the valve (3) at the bottom of the canister is closed.
31.
Remove the canister top and add 24 ml (0.8 fl. oz.) Top Engine Cleaner, P/N 1050002 (Canada P/N 992872), to the canister.
32.
Fill the remainder of the canister with regular unleaded gasoline and install the canister top.
33.
Suspend the J 35800-A in a convenient location.
34.
Connect the hose from the J 35800-A to the service port on the J 44466-12.
35.
Open the valve (3) at the bottom of J 35800-A.
36.
Connect a "shop air" source to the fitting at the top of J 35800-A and adjust the regulator (1) to 75 psi.
37.
Start the vehicle. It may be necessary to re-adjust the J 35800-A pressure regulator to maintain 75 psi.
38.
Let the vehicle run at idle until the canister is empty and the vehicle stalls.
39.
Remove the shop air supply from J 35800-A.
40.
Depressurize the J 35800-A.
41.
Disconnect the J 35800-A hose from the J 44466-12.
42.
Remove the vacuum brake booster hose and connector from the intake manifold.
43.
Remove ignition wires 1, 3, 5, and 7 from the distributor cap.
44.
Bleed the residual pressure from J 44466-12.
