Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
IMPORTANT: When disconnecting the poppet nozzles, remember the sequence in order to ensure correct poppet nozzle placement to each cylinder.
7. Squeeze the poppet nozzle locking tabs together while lifting the nozzle out of the casting socket.
8. Remove the fuel meter body from the bracket by releasing the lock tabs on the bracket.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Install the fuel meter body retaining bracket in the intake manifold.
