Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Idle Speed: Testing and Inspection
IDLE SPEED
-
When there is a problem with the idle refer to Idle Air Control System Diagnosis. See: Computers and Control Systems/Testing and Inspection
-
System too lean (High air/fuel ratio)-Idle speed may be too high or too low. Engine speed may vary up and down, disconnecting the IAC valve
has no effect.
-
System too rich (Low air/fuel ratio)-idle speed too low. Scan counts usually above 80. System obviously rich and may exhibit black exhaust
smoke. Scan tool and/or voltmeter will read a Heated Oxygen Sensor (HO2S) signal fixed above 800 mV (0.8V).