Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Intake Air Duct: Service and Repair
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the air intake retaining nut.
3. Remove the air intake duct from the throttle body assembly.
4. Loosen the air intake duct from the MAF Sensor assembly.
5. Disconnect the IAT electrical connector from the IAT Sensor.
6. Remove the air intake duct.
INSTALLATION PROCEDURE
1. Install the air intake duct to the MAF Sensor assembly.
2. Connect the IAT Sensor electrical connector.
3. Install the air intake duct on the throttle body assembly and tighten the retaining nut. Tighten the nut 2 Nm (18 lb. in.).
