Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Description
1. Install the inflatable restraint front end discriminating sensor (3) to the front end lower tie bar (1).
2. Install the inflatable restraint front end discriminating sensor mounting fasteners (4).
Tighten
Tighten fasteners to 10 N.m (89 lb. in). Refer to Fastener Notice in Vehicle Damage Warnings.
3. Connect the inflatable restraint front end discriminating sensor harness connector to the sensor.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint front end discriminating sensor harness connector.
5. Enable the SIR system. Refer to Enabling the SIR System.
