Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
REMOVE OR DISCONNECT
^
Steering gear from vehicle.
DISASSEMBLE
^
Rotate stub shaft back and forth to drain fluid.
1. Retaining ring (1) by using a punch inserted into the housing access hole to unseat it.
2. Plug (2).
3. O-ring seal (3).
ASSEMBLE
^
Lubricate O-ring seal with power steering fluid.
1. O-ring seal (3) into housing (20).
2. Plug (2).
3. Retaining ring (1).
^
Install retaining ring (1) so that open end is approximately 25 mm (1 inch) from access hole in housing (20).
INSTALL OR CONNECT
^
Steering gear.
Thrust Support Assembly Replacement
