Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
7. Drive the bearing and the cup (8) from the hub (3).
8. Clean the old oil sealing compound from the oil seal bore in the hub.
9. Clean the bearing assemblies in a solvent using a stiff brush in order to remove the old lubricant.
^
Dry the bearings with compressed air.
^
Do not spin the bearings.
10. Clean the lubricant from the axle housing and from inside the hub.
11. Remove the gasket material from the hub and the axle shaft.
12. Inspect the bearings for wear, chipped edges or other damage.
13. Check for flat or rough spots on the rollers.
14. Inspect the cups for pits and cracks.
15. Replace parts as necessary.
INSTALLATION PROCEDURE
^
Tools Required
-
J8092 Driver Handle
-
J8608 Pinion Bearing Cup Installer
-
J24426 Outer Bearing Cup Installer
-
J24427 Inner Wheel Bearing Cup Installer
^
Axle Shaft Seal Installer.
1. Install the outer bearing cup (8) into the hub (3).
