Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Case: Service and Repair
4L60-E Automatic Transmission
REMOVAL PROCEDURE
1. Raise the vehicle.
2. Disconnect the vehicle speed sensor electrical connector.
3. Remove the vehicle speed sensor bolt from the case extension.
4. Remove the seal from the case extension.
5. Remove the propeller shaft.
6. Remove the transmission mount nut and washer.
7. Support and raise the transmission slightly, using the transmission jack.
8. Remove the transmission mount bolts.
9. Remove the transmission mount and shims, if present.
10. Remove the case extension bolts (32).
11. Remove the case extension (31) with the seal (30).