Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
12. Remove the vehicle speed sensor from the case extension if necessary.
INSTALLATION PROCEDURE
1. Install the case extension (31) with a new seal (30).
2. Install the bolts (32).
^
Tighten the bolts to 35 Nm (26 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the transmission mount and shims, if present.
4. Install the transmission mount bolts.
^
Tighten the bolts to 34 Nm (25 ft. lbs.).
5. Lower the transmission.
6. Install the transmission mount nut and washer.
^
Tighten the nut to 41 Nm (30 ft. lbs.).
7. Install the propeller shaft.
