Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
14. Position (snap) the plastic cap onto the fitting. Do not manually depress the retaining ring when installing the plastic cap onto the quick connect
fitting.
15. Ensure that the plastic cap is fully seated against the fitting.
16. Ensure that no gap is present between the cap and the fitting.
17. Ensure that the yellow identification band on the tube is hidden within the quick connect fitting. A hidden yellow identification band indicates
proper joint seating.
18. Do not install the cooler line into the fitting incorrectly.
19. If you cannot position the plastic cap against the fitting, remove the retaining ring from the quick connect fitting per step 3 of the cooler line