Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
9. Install the manual shaft detent roller and spring assembly (3) and bolts (2 and 4).
10. Install the two wiring harness clips (1) and bolts (2).
11. Install the wiring harness clip (1) and bolts (2).
12. Install the lube oil pipe (5) with the short end into the control valve body.
13. Install the lube oil pipe retainer (7) and the bolt (6).
14. Tighten the bolts sequentially to 11 Nm (97 inch lbs.).
15. Install the remaining control valve body bolts.
