Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
13. Install the screw
^
Tighten the screw to 3.4 Nm (25 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
14. Install the carrier cover gasket or RTV (if used).
15. Install the carrier cover (4).
16. Install the carrier cover bolts (3) and clips.
^
Tighten the bolts (3) in a crosswise pattern to 27 Nm (20 ft. lbs.).
17. Install the brake drum (6).
18. Install the wheel and tire assembly.
19. Lower the vehicle.
20. Fill the housing with axle lubricant to the filler plug hole level.
