Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
6. Install the pressure control solenoid retainer bolt and screw.
^
Tighten the TCC solenoid bolts/screws to 11 Nm (97 inch lbs.).
^
Tighten the pressure control solenoid bolt/screw to 11 Nm (97 inch lbs.).
7. Install the TCC PWM solenoid to the control valve body.
8. Install the TCC PWM solenoid retainer.
IMPORTANT: The piston legs must face toward the case when installed.
9. Connect the component electrical connectors.
10. Install the 1-2 accumulator piston to the accumulator cover.
