chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door - Wind Noise|Page 12324 > < Front Door - Wind Noise|Page 12322
Page 4
background image

Front Side Door Window Inner Sealing Strip

A revised side door window inner sealing strip, P/N 15759193, has been developed. The length of the sealing lip has been revised to help decrease
windnoise.

1.

Remove the front door trim panel from the door. Refer to the Interior Trim subsection of the applicable Service Manual for trim panel replacement
procedures.

2.

Lower the window.

3.

Remove the door window inner sealing strip from the pinchweld flange.

4.

Install the new door window inner sealing strip on the pinchweld flange.

5.

Raise the window.

6.

Install the front door trim panel. Refer to the Interior Trim subsection of the applicable Service Manual for trim panel replacement procedures.

Front Side Door Window Outer Sealing Strip

A revised front side door outer sealing strip, P/Ns 15753759 (LH) and 15753755 (RH), has been developed. The extrusion of the outer beltline and the
retaining clips have been revised.

1.

Lower the window.

2.

Tilt the top of the door window outer sealing strip away from the vehicle in an outboard direction.

Front Door - Wind Noise|Page 12324 > < Front Door - Wind Noise|Page 12322