Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
7. Locate the position of the recliner mechanism rod (6) through the cushion cover.
8. Make a small "X" cut just large enough for the recliner rod (6) to go through.
9. Slip the cover over the recliner mechanism rod (6).
10. Install the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front (See: Seat Back/Service and Repair/Seat Back Recliner
Handle Replacement - Front) .
11. Position the seat back to the seat cushion assembly.
Notice: Refer toFastener Notice in Cautions and Notices.
12. Install the bolts (3,7).
Tighten the bolts to 32 N.m (24 lb ft).
13. Position the seat assembly to the seat adjuster assembly (4).
14. Install the bolts to secure the seat assembly to the adjuster (4).
Tighten the bolts to 25 N.m(18 lb ft).
15. Install the seat into the vehicle. Refer to Seat Replacement (See: Service and Repair/Seat Replacement) .
