Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
3. Install the coolant air bleed pipe (2) and gaskets (3) onto the cylinder heads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the coolant air bleed pipe studs (1).
^
Tighten the coolant air bleed pipe studs to 12 Nm (106 inch lbs.).
5. Install the coolant air bleed pipe covers (2) and bolts (1).
^
Tighten the coolant air bleed pipe cover bolts to 12 Nm (106 inch lbs.).
6. Install the intake manifold.