Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
Data Link Connector: Service and Repair
DATA LINK CONNECTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the bolts/screws from the data link connector.
2. Remove the lower data link connector.
INSTALLATION PROCEDURE
1. Place the data link connector into position.
2. Install the bolts/screws to the data link connector.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts/screws to 2 N.m (18 lb in).
