Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
Knee Diverter: Service and Repair
Knee Bolster Bracket Replacement - Right
KNEE BOLSTER BRACKET REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Remove the knee bolster trim panel.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the nuts (1) securing the knee bolster bracket to the instrument panel (I/P).
3. Remove the knee bolster bracket (2).
INSTALLATION PROCEDURE
1. Align the knee bolster bracket (2) to the I/P.
2. Install the nuts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nuts (1) to 10 N.m (88 lb in).
3. Install the knee bolster trim panel.